Product
DFC-12I
Cover DFC Series 600VAC 200A Class J LED
Mersen's wide range of accessories
All products
442 products
Product
DFC-13
Cover DFC Series 250VAC 60A
Product
DFC-13I
Cover DFC Series 250VAC 60A LED
Product
DFC-1
Cover DFC Series 600VAC 30A Class J
Product
DFC-2
Cover DFC Series 600VAC 30A Class R, K, H
Product
V1033684 - 1.003.571
Cable termination for FSD Set of 3 Al/Cu clamp 00 50-95²
Product
W1023450 - 1.002.646
Cable termination for FSD Set of 30 M8 insert nut NH00
Product
Y1024579 - 1.003.377
Cable termination for FSD Kit of top terminal NH1-3
Series
Wiring bars / Power supply for DIN Fuse Switch Disconnectors
Fork Design
Wiring bars in fork design are ideal for the wiring of modular panel-mounting devices as per DIN 43880 with flat-type, dual-function or single-screw terminals.
Additional incoming terminals are required when wiring devices with flat-type or single-screw terminals.
In contrast, devices with dual-function terminals allow bar connection to the top section of the terminal with simultaneous incoming supply in the bottom section.
The use of end caps on multi-pole wiring bars guarantees optimum shock-hazard protection and prevents arcing at bar ends.L@£Pin Design
Wiring bars in pin design are ideal for the wiring of modular panel-mounting devices to DIN 43880 with box terminal, frame terminal or two-scre clamp.
The incoming supply to the wiring-bar system is provided over additional incoming terminals.
Wiring bars in fork design are ideal for the wiring of modular panel-mounting devices as per DIN 43880 with flat-type, dual-function or single-screw terminals.
Additional incoming terminals are required when wiring devices with flat-type or single-screw terminals.
In contrast, devices with dual-function terminals allow bar connection to the top section of the terminal with simultaneous incoming supply in the bottom section.
The use of end caps on multi-pole wiring bars guarantees optimum shock-hazard protection and prevents arcing at bar ends.L@£Pin Design
Wiring bars in pin design are ideal for the wiring of modular panel-mounting devices to DIN 43880 with box terminal, frame terminal or two-scre clamp.
The incoming supply to the wiring-bar system is provided over additional incoming terminals.
Product
A302887E - 02923.162159
Busbar Pin 3-pole 162mm 16mm² cross section with insulation Pitch 27mm